Antigravity drive parts needed:

• A void source of considerable size (a large void battery, a large void crystal, intensely blessed object, etc)
• A twelve hundred pound copper coil
• At least 30' of copper wire
• A centrifuge
• A set of switches
• Either a void-gravity converter, or
  • A small void source
  • About 12" of copper wire
  • Something about 6" by 6" that is sturdy but not conductive to void. A thin sheet of lead or silver would do
  • About 6 gallons of hydrogen peroxide
  • A one gallon glass jar with a lead or silver lid

Void-gravity converter:

Fill the jar with the hydrogen peroxide, run the copper wire into it, along the rim of the opening, & out again. Make sure the wire touches the liquid. Place the metal plate inside the jar, with another wire attached to it & to the wire around the rim. Place the small void source into the jar, free floating. Seal the jar, but keep one small piece of wire running out of it.

Antigravity drive:

Connect the large void source to the converter via copper wire. Connect the coil to the centrifuge via copper wire. Connect the void-gravity converter (homemade or otherwise) via copper wire inside the center of the centrifuge. Make sure the converter is stable. The coil should be at least 10 feet from the centrifuge in the direction you wish to be the back of your drive. Connect the switches between the large void source & the converter & between the converter & the coil.

All connections should be with copper wire.

The reaction of void & hydrogen peroxide will cause the void to alter its basic purpose--from nulling magical energy to nulling gravity. The simulated gravity of the centrifuge will keep a constant pulse of gravity on the converter, which will send that energy up through the copper wire to the copper coil, which will release the energy.

The switch on the void source will allow you to control the flow of void energy into the converter, allowing you to control how much gravity is nulled. The centrifuge both "creates" & "stores" the gravity. The switch before the coil allows you to control the null-gravity energy released.